Beretta is one of the most famous small arms manufacturers in the world. Fabbrica d'Armi Pietro Beretta is an Italian company which was founded in 1526 by gunsmith Mastro Bartolomeo Beretta (1498-1565) from Lombardy in Italy. He produced 185 arquebus barrels for the Arsenal of Venice and the original invoice is still in the firm’s archives showing that he was paid the sum of 296 Ducats for these early gun barrels. Beretta is in fact one of the worlds oldest corporations and is still owned by Bartolomeo Beretta’s descendants, with Ugo Gussali Beretta as president and his sons Pietro and Franco Beretta also running this successful business which employs about 2700 staff world wide and has an annual turnover of over £200 million. The direct line of the Beretta family can be traced from Bartolomeo (1498-1565) to Pietro (1791-1853) who started the first expansion of the business, to his son Giuseppe (1840-1903) who first expanded the company into the international market, to Pietro (1870-1957) who introduced modern manufacturing techniques, to his sons Giuseppe (1906-1993) and Carlo (1908-1984) who made the company the multinational it is today.

In 1918 the Beretta model 1918 became the second sub machine gun to be used by the Italian army, and Beretta continued to produce pistols and rifles for the Italian Armed forces until the Armistice between Italy and the Allied forces in 1943 during World War II, although some production facilities were seized by the German forces in Northern Germany and continued in use until the German surrender in 1945.

Beretta also produced weapons for the Imperial Japanese forces during World War II. In 1938 a delegation of Japanese naval officers travelled to Italy to buy weapons for the Japanese special landing forces. Three Italian arms manufacturers, one of which was Beretta, produced over 100,000 rifles for the Japanese special landing forces. The Japanese classified these 6.5mm weapons as the Type “I” rifle; they were a Carcano action rifle in a Japanese style wooden stock. The last delivery of such weapons left Venice by U Boat in 1942. After the Second world War Beretta won the contract to repair American M1 Garand rifles which were given to Italy, these weapons were modified to become the Beretta BM-59 rifle which was considered a fine weapon and more accurate than the similar American M14 rifle.

Beretta now produces over 1500 guns a day and exports to 100 countries, the most famous weapon being the Model 92, 9mm Pistol made popular in action movies and a weapon which has been adopted for use by the American Armed forces, and elements of the French armed forces. Other police and military clients include Italy and Turkey.

Beretta M9

The Beretta M9—officially the Pistol, Semiautomatic, 9mm, M9—is the designation for the Beretta 92FS semi-automatic pistol used by the United States Armed Forces. The M9 was adopted by the United States military as their service pistol in 1985.

  • 10 rounds (restricted)
  • 15 rounds (standard) [2]
  • 17 rounds (standard for the A3) [3]
  • 20 rounds (extended) [4]
  • 30 rounds (extended) [5]
  • 32 rounds (extended) [6]
  • 35 rounds (extended) [7]

The M9 won a competition in the 1980s to replace the M1911A1 as the primary sidearm of the U.S. military, beating many other contenders, and only narrowly defeating the SIG Sauer P226 for cost reasons. [8] It officially entered service in 1990. [9] Some other pistols have been adopted to a lesser extent, namely the SIG P228 pistol, and other models remain in use in certain niches.

The M9 was scheduled to be replaced under a United States Army program, the Future Handgun System (FHS), which was merged with the SOF Combat Pistol program to create the Joint Combat Pistol (JCP). The JCP was renamed Combat Pistol (CP), and the number of pistols to be bought was drastically cut back. The U.S. Army, Navy, Air Force, and Marine Corps are replacing the M9 with the SIG Sauer M17 and M18. [10]


The Beretta 92 pistol evolved from earlier Beretta designs, most notably the M1923 and M1951. From the M1923 comes the open slide design, while the alloy frame and locking block barrel, originally from Walther P38, were first used in the M1951. The grip angle and the front sight integrated with the slide were also common to earlier Beretta pistols. What were perhaps the Model 92's two most important advanced design features had first appeared on its immediate predecessor, the 1974 .380 caliber Model 84. These improvements both involved the magazine, which featured direct feed that is, there was no feed ramp between the magazine and the chamber (a Beretta innovation in pistols). In addition, the magazine was a "double-stacked" design, a feature originally introduced in 1935 on the Browning Hi-Power. [2]

Carlo Beretta, Giuseppe Mazzetti and Vittorio Valle, all experienced firearms designers, contributed to the final design in 1975. [3]

Evolution Edit

92 Edit

Production began in May 1976, and ended in February 1983. Approximately 7,000 units were of the first "step slide" design and 45,000 were of the second "straight slide" type. [4]

92S Edit

In order to meet requirements of some law enforcement agencies, Beretta modified the Beretta 92 by adding a slide-mounted combined safety and decocking lever, replacing the frame mounted manual thumb safety. This resulted in the 92S, which was adopted by several Italian law enforcement and military units. The magazine release button is at the bottom of the grip as is customary in Europe. This model was produced from 1978 to 1982.

92SB (92S-1) Edit

The 92SB, initially called 92S-1, was specifically designed for the USAF trials (which it won), the model name officially adopted was the 92SB. Features added include a firing pin block (thus the addition of the "B" to the name), ambidextrous safety levers, 3-dot sights, and relocated the magazine release catch from the bottom of the grip to the lower bottom of the trigger guard. The later relocation of the magazine release button means preceding models (92 & 92S) cannot necessarily use later magazines, unless they have notches in both areas. [5]

A compact version with a shortened barrel and slide and 13-round magazine capacity known as the 92SB Compact was manufactured from 1981 to 1991. [5]

92F (92SB-F) Edit

In 1984 Beretta introduced a modified version of the model 92SB slightly to create the 92SB-F (the "F" added to denote entry of the model in U.S. Government federal testing) by making the following changes:

  • Design of all the parts to make them 100% interchangeable to simplify maintenance for large government organizations.
  • Squared off the front of the trigger guard. The squared off trigger guard protects both the gun and the shooter during hand-to-hand combat. [6] Some have suggested that the square guard enables the shooter to grip the front of the trigger guard with the supporting forefinger to enhance aiming however, firearms trainer and Beretta collaborator Ernest Langdon says that using the forefinger to grip the front of the trigger guard is improper technique. [7]
  • Recurved the forward base of the grip to aid aiming. the bore to protect it from corrosion and to reduce wear.
  • New surface coating on the slide called Bruniton, which allegedly provides better corrosion resistance than the previous plain blued finish. [8] : 16

The French military adopted a modified version of the 92F with a decocking-only lever as the PAMAS G1. These pistols have tellurium in the slide, making the steel brittle and as such only have a service life of approximately 6,000 rounds. [9]

92FS Edit

The FS has an enlarged hammer pin that fits into a groove on the underside of the slide. The main purpose is to stop the slide from flying off the frame to the rear if it cracks. This was in response to reported defective slides during U.S. military testing. [10] The 92FS also came in a Centurion model which featured a shorter barrel that just clears its full size frame.

The Beretta 92's open slide design ensures smooth feeding and ejection of ammunition and allows easy clearing of obstructions. The hard-chromed barrel bore reduces barrel wear and protects it from corrosion. The falling locking block design provides good accuracy and operability with suppressors due to the in-line travel of the barrel. This is in contrast to the complex travel of Browning designed barrels. The magazine release button is reversible with simple field tools. Reversing the magazine release makes left-handed operation much easier.

Increasingly, it has become popular to reduce handgun weight and cost as well as increase corrosion resistance by using polymers. Starting around the year 2000, Beretta began replacing some parts with polymer and polymer coated metal. Polymer parts include the recoil spring guide rod (which is now also fluted), magazine floor plate, magazine follower and the mainspring cap/lanyard loop. Polymer coated metal parts include the left side safety lever, trigger, and magazine release button. [11]

Magazines Edit

To keep in line with the introduction of laws in some locations restricting magazines that hold more than 10 rounds, Beretta now manufactures magazines that hold fewer than the factory standard 15 rounds. These magazines have heavier crimping (deeper indentations in the side) to reduce the available space while still keeping the same external dimensions and ensuring that these magazines can be used on existing firearms. Beretta also produces 15 round "Sand Resistant" magazines to resolve issues encountered with contractor made magazines, and 17 round magazines included with the A1 models. Both magazines function in earlier 92 series and M9 model pistols.

Italian magazine manufacturer Mec-Gar now produces magazines in blue and nickel finishes with an 18-round capacity, which fit flush in the magazine well on the 92 series. Mec-Gar also produces an extended 20-round blued magazine that protrudes below the frame by 3 ⁄ 4 inch (19 mm). These magazines provide users in unrestricted states with a larger capacity magazine.

Beretta 20 Facts & History The Beretta 20 a self-cocking pistol with external hammer and inertial system tip barrel. The very first gun of this type was named as the Model 20. This model came in 6.35mm (.25 Auto) chambering. A few earlier experiments were made with the standard model 950 frame. It got exactly the same tip-up barrel like the model 950, and also the double-action was accomplished with an external draw­bar on the right side of the frame. By the way, a double-action trigger was added to the model 950 about 1967. Instead of the previous torsion type wire spring a new model 20 was designed with a completely new system. On each side of the frame were designed quite heavy pivoting arms that contact the slide, and also lobes on each arm rest on nearly vertical coil springs which are in tubular housings attached to the frame. The 20 is a well constructed and designed pistol that became immediately a big success in European countries and other parts of the world as well. Unfortunately, the small size version of the 20 was prohibited to import into the United States after its introduction to the market. After the production of the Model 950BS was well under way at the Beretta facility in Maryland, so it was decided the Model 20 should be made in Maryland. Production of this model began in 1983 at Accokeek, Maryland. Pistols made in the USA are marked by their markings "MADE BERETTA USA CORP., ACKK, MD." and that&rsquos way can be recognized quite easily. Shortly after the introduction also an almost identical pistol named Model 21A chambered in .22lr caliber was introduced on the market. Sights of the model are fixed on the frame. Finish of the gun is an alloy frame blackened or blued. Grips are usually made of plastic.

Beretta summary

Weight: 280 gLength: 4.7 inCartridge: .22 LR and .25 ACPType: Double-actionMuzzle velocity: 750 - 900 ft/secFeed system: 7 round magazineType: semi automaticBarrel length: 60.5 mm Uses The Beretta 20 is designed for self defense and high concealment. A small handgun ideal to fit into the concealed carry category. The production of this handgun ended in 1985 and it was replaced by the Beretta 21 A Bobcat, which is a modified and upgraded version of the Beretta 20.

The Amazing History of Beretta (Oldest Gun Manufacturer in the World) | Firearms of America

Welcome to Firearms of America! Today, let’s dive, yet again, into a history. The Beretta history. Beretta is a very popular Italian firearms manufacturer, we all know that. But did you know that in 2026, Beretta will be celebrating its 500 year old history? Beretta is the oldest active manufacturer of firearms and firearms components in the world!

Since the times of Roman Empire, a northern Italian river valley called Val Trompia has been the central location for iron mining. After the Renaissance, Val Trompia also became the center of weapons manufacturing. By mid 16th century, Val Trompia had forty different ironworks, that were supplied by fifty different mines and eight smelters. Well, the birth of the Beretta is in Gardone village, in the middle of Val Trompia.

Beretta has been in operation since around 1500s, in fact, the very first recorded contract is dated back to October 1526 for some arquebus barrels, arquebas being the type of a long gun that was around in Europe back in 15th century. According to the contract, the Republic of Venice paid 296 ducats to the Maestro di Canne, which translates to the master gun maker, Bartolomeo Beretta. Yes, the original founder of Beretta, Bartolomeo Beretta.

In the 1698, Beretta became the second largest gun barrel producer in Gardone. By the 17th century, Beretta became the largest gun barrel maker in Gardone.

The knowledge of gun barrel manufacturing has been passed from Bartolomeo to his son, later to great son, later to great great son, it has been passed from generation to generation and that is how Beretta has been owned by the same family for almost 500 years now.

Beretta USA was founded in 1977, when Beretta bought a bankrupt gun factory near Washington, DC. Beretta Model 92 nine-millimeter pistol, one of the most widely produced firearms in history, had been introduced two years earlier this was the gun that would soon land Beretta a massive military contract and thousands of smaller deals to supply law enforcement agencies. A huge breakthrough to the North American market for Beretta came in the 1980s, when their Beretta 92 was selected as a sidearm for the United States Army to replace the 1911 pistol. The Beretta 92 was designated as the Beretta M9 pistol. The M9 was serving the US Army for quite a while, until it was replaced by the Sig Sauer P320 in 2019.

The deal raised Beretta’s profile considerably in the United States. Its pistols continued to appear in Hollywood movies such as Lethal Weapon. Law enforcement agencies around the country began ordering the commercial version (92-F) of the Beretta Model 92 nine-millimeter handgun, appreciating its ability to fire 15 shots before reloading, versus the eight-round capacity of most large caliber pistols. Civilians also bought them the pistol retailed for about $600. Smaller .22 caliber pistols sold for $200.

By 2000, the company grew to 75,000 square feet in Gardone and another 50,000 square feet in a few sites in Italy, Spain and Maryland, United States. Also, in early 2000, Beretta bought the remaining shares in Benelli Arms S.p.A., another venerable Italian gunmaker. In March of that year, it bought an 86 percent share in Aldo Uberti & Co., s.r.l., a $15 million a year replica gunmaking business founded in 1959. With a corporate umbrella company in place to oversee its subsidiaries, Beretta Holding next acquired Sako Ltd., a Finnish maker of hunting and sports rifles, from Metso Corporation in January 2001.

Today, Beretta, also known as Fabbrica dArmi Pietro Beretta, is run by Franco Gussalli Beretta, who is the president and the CEO of the company.

Beretta has a wide range of semi-automatic pistols, a few revolvers, plenty of shotgun models, rifles, carbines, submachine guns, machine pistols and even grenade launchers.

500 years of history! One family, from generation to generation! Truly, an Amazing History of Beretta!

The Beretta Story

Beretta is a historic gunmaking dynasty with origins that go back centuries. To the clay shooters, however, the company’s over-and-under shotguns are of the greatest interest as they continue to figure in their sport at every level of competition – and their constant development is a fascinating story.

The clay revolution

Long before clay shooting was devised, Beretta was making shotguns. But by the 1930s, the family was looking across the Atlantic and considering how best to match the success that Browning was enjoying with its new over-and-under. In terms of design for Beretta, as with many other gunmakers, it presented a problem, largely in the matter of how to lock the Superposed barrels to the action.

John Browning had taken a shotgun and fitted the form of under-bolting, designed for side-by-side guns, to the underside of the bottom barrel. In terms of durability, barrels pivoting on a full-width hinge pin, with a locking bolt moving forward under the breech face, was more than strong enough, and Browning had looked no further than that. The extensions to the underside of the bottom barrel, which gunmakers call ‘lumps‘, were also machined and fitted right through the floor of the action body. A bolt-and-braces design indeed, but to Italian eyes it created an action they perceived as rather ugly.

Beretta looked for something more svelte and elegant, but at the same time it did not wish to copy the British Boss or Woodward guns. Always looking to keep costs within bounds, the company wanted something easier to manufacture than an expensive-to-make combination of draws and wedges that most of the London makers had adopted.

Meanwhile, Beretta’s best designer, the great Tullio Marengoni, was carrying out some experiments that, to begin with, terrified his employers. He was experimenting with guns without any form of bolting and was simply tying the barrels and action together with rope to stop them being blown apart when loaded with powerful charges. He finally concluded that the forces generated in these explosions actually drove the barrels and action together, and a type of locking system that reinforced this phenomenon was required.

Marengoni finally devised a cross-bolt located above the bottom barrel that closed over locking lugs integral to the barrel’s monobloc. Replaceable shoulders, also integral to the monobloc, met with reciprocating shoulders each side of the action’s breech face in order to reinforce this arrangement.

The SO series

Beretta’s Sovroposto SO Sidelock was launched in the mid 1930s and the firm’s catalogue emphasised the great strength of its action, uncompromised by having to machine slots in the action’s bottom plate to accommodate barrel lumps locking through them, as in the case of the Browning.

As a gun for hunting and clay shooting, the Beretta SO5 was a great success. Its sidelock action exuded a certain glamour that drew customers from many countries to Beretta’s gates for the custom fitting and special engraving that could be provided at extra cost.

The SO’s heyday as a clay gun lasted from the 1950s until the beginning of the 1980s. In 1956, Liano Rosini, an Italian Trap shooter who had already won two medals in world championships, captured the gold medal at the Olympics in Melbourne. In 1972, Angelo Scalzone, a colourful and flamboyant shooter from Naples, claimed the Olympic gold medal with a record score of 199ex-200.

Carlo Beretta spoke of his shooters as his Formula One team, and its many successes brought medals and created sales for the SO sidelock. But while the SO had been successful and added to Beretta’s prestige as a gunmaker, it never represented the volume sales John Browning’s much-lower priced gun achieved.

Innovative gunmaking

By the 1950s, manufacturing costs in Europe were rising steeply and some gunmakers turned to manufacturers in other parts of the world with more favourable currencies. Browning’s alliance with Miroku, beginning in the 1960s, was one solution. Beretta, however, was determined to maintain its industry in its own country. This meant devising a less expensive model – and Beretta’s solution was revolutionary.

Traditional gunmaking, even up to the present day, involves making all the component parts first, including the barrels, to the point where they can all be fitted together in an unfinished state. The gun is then disassembled and the parts finished. The action is engraved and hardened, along with the internal parts, the barrels are blacked and finally the gun is reassembled.

From the best artisan gunmakers results can be outstanding, but their high prices reflect this. Beretta, instead, created a process described as ”making in the black.” Each of the gun’s components would be made, finished and assembled just once.

To achieve this, each part would have to be machined more accurately than before, as only the absolute minimum of final fitting was possible. This could only be achieved with the most accurate and, therefore, most sophisticated machinery. The capital investment would be huge, but Beretta calculated that the cost savings in manufacture would be such as to provide an exceptionally well-made and finished gun at a competitive price. These courageous and resourceful Italians were proved correct, and clay shooters were soon using competitively priced guns boasting excellent mechanical function, reliability and handling.

Facing the competition

1972 Olympic gold medallist Angelo Scalzone with Ugo Gussalli Beretta and Silvano Basagni

Competition improves the breed, and this is as true of shotguns as it is of racehorses. Daniele Perazzi’s MX8 Trap gun, with a detachable mechanism, raised the bar considerably. From the moment clay shooters first saw the MX8 they knew it was the future, and so did Beretta. Ennio Mattarelli did not win the 1968 Olympic Games with Perazzi’s MX8, for which it was built, but he won the World Championship in 1969 with this new drop-lock gun. To the serious competitive shooter its appeal was obvious, the detachable trigger with flat springs providing the best trigger pulls possible. And it was easily repaired or, even more quickly, replaced with a spare. It is not only mechanically efficient, it also represents an insurance policy. Being first in the market with this type of gun gave Perazzi an advantage, and without any patents to circumnavigate it had a clear field to produce the best design possible.

Beretta persisted for a while to equip its sponsored shooters with the SO Sidelock, but it was increasingly expensive and lacked the Perazzi’s obvious advantages. In 1992, Beretta finally capitulated, and the ASE90, its first drop-lock gun, was launched. Much of the gun was produced in Beretta’s custom shop and while they were well made and adopted by Beretta’s sponsored shooters, it lacked the popular appeal of the Perazzi.

An Olympic feat of gunmaking

This gun was followed by the DT10, much more of a volume-production gun. Tougher, less expensive and more reliable, it was successful but still didn’t dent the MX8’s appeal. That it had failed to do so was demonstrated at the 2008 Beijing Olympics where 14 out of the 15 first-placed shooters in the Trap event used a Perazzi.

If the history of Beretta demonstrates anything, it is the company’s resilience and tenacity, together with its capacity to react positively to setbacks.

The response to the 2008 wipeout in the Trap event in Beijing was the DT11. I was at its European launch in Cyprus in November 2011 and a senior company manager, Carlo Ferlito, made no bones about the Tokyo debacle. He said: “We have lost a lot of business in the premium-grade target gun market to a company whose names begins with ‘P’ and ends with ‘I’.”

Josip Glasnovic, of Croatia, secured gold in the Trap at Rio 2016 using a DT11

As I remarked in a report I wrote for Clay Shooting in January 2012, Beretta didn’t launch the DT11 project with a clean sheet of paper, but it is undoubtedly the company’s most fully developed purpose-built target gun to date. While the iconic cross-bolted locking system was still in place, the action body was 3mm wider and 39 grams heavier. I shot a 76cm-barrelled Trap gun at some OT targets, and for me it was the best handling Beretta ever. The 2012 London Olympics was only months away but, nevertheless, DT11 shooters still picked up a gold, silver and bronze medal. It was the beginning of the great comeback.

In Rio this year the results were more emphatic. In the Trap event, DT11 shooters Josip Glasnovic and Giovanni Pellielo captured gold and silver medals. The Ladies event saw Catherine Skinner and Natalie Rooney also secure the first two medal placings. In Double Trap, another silver medal went to Marco Innocenti. In the Ladies Skeet, DT11 shooters Chiara Cainero and the legendary Kimberly Rhode won silver and bronze. In the Men’s Skeet event there was another gold medal for Gabriele Rossetti and a bronze claimed by Ahmed Al Rashidi.

It could be said that this was merely a big company with huge resources getting its act together after a serious blip. Even if this was the case, it has been to the benefit of the clay-target shooting fraternity. Rivalry between companies is important – it stimulates inventiveness that can result in excellence. This has been the case for the DT11 and already its greatest competitor has responded with a new gun. And guess what? The action body is 3mm wider and 40 grams heavier.

The Beretta 950 is a simple blowback pistol with a single action trigger mechanism and tip-up barrel. The frame is made out of aluminum alloy, the slide and barrel are carbon steel. [2]

Early models (*950* and *950B* Pre-1968) do not have a safety lever, employing an inertial firing pin for safe hammer-down carry instead (the half cock notch is not for carry and could cause the gun to fire if dropped on the hammer). Later models (*950BS* Post-1968) are provided with an external safety lever. [2] [3]

The Beretta 950 Jetfire chambered in .25 ACP is a backup, self-defense pistol that is intended for undercover agents, police officers or individuals licensed to carry a concealed firearm for self-defense. The Minx version in .22 Short is not advised for such a role due to the caliber. [2]

Being light weight, low profile and easily concealable makes it ideal for concealed carry. The tip-up barrel makes it easy to make safe and at the same time, easy to make ready to fire, and being chambered in .25 ACP means it is more reliable than similar pocket pistols chambered in .22 LR.

The .25 ACP round allows it to be a very compact, lightweight gun, but the cartridge is relatively short ranged and low powered, putting it in the same class as the .22 LR rimfire cartridge. The accuracy of the pistol is adequate, but the small grip and short sight radius may limit some shooters to being effective only at short ranges. [2]

Users being timid about recoil can make it prone to bite (the slide can cut the top of the shooter's hand when fired) due to them holding the firearm too tightly. As the pistol lacks a shell extractor, relying instead on blowback pressure to clear the shells, misfires are removed manually by tipping up the barrel and pulling the shell out. This is usually viewed as a limitation but can also be seen as an advantage. [2]


The Beretta 3032 Tomcat is a simple blowback pistol with a single- and double-action trigger mechanism. [3] It also features a tip-up barrel. [3] It is fitted with a frame-mounted thumb safety. This safety acts as a slide stop when engaged. The frame is made of aluminium alloy while the slide and barrel are carbon steel in the standard version and stainless steel in the "Inox" variant.

A document included with all Model 3032 Tomcat pistols warns that the owner should never use ammunition that exceeds 130 ft⋅lbf (176 J) of muzzle energy. Notably, even normal factory .32 ACP cartridges have become significantly more powerful in recent decades, and can well exceed the 130 ft-lb limit of the pistol's initial design, one that Beretta continues to use to this day. Representatives of Beretta USA have often recommended that owners purchase their .32 ACP ammunition online, so that the muzzle energy is properly verified in specification charts. Use of any ammunition that exceeds this rating may cause irreparable or prohibitively expensive damage to the firearm, most commonly manifesting as a crack on the frame. However, contrary to common belief, this is not considered a defect in factory materials, but a problem caused by ammunition and the consumer's neglect of the factory parameters. [4]

Notably, the design omits an extractor mechanism, thus, the firearm relies solely on the blowback energy of the cartridge to extract and eject spent casings.

Beretta recommends caution when removing grip panels, as the safety mechanism is retained underneath with spring tension. Parts can be lost during improper removal, making the firearm inoperable until repaired. The barrel should also not be completely removed from the assembly, which may cause frame damage.

Beretta Web - Beretta Pistols 70 Series

The BERETTA 70 " SERIES, designed on the production experiences of more than ten millions of guns, is based on the classic features* of the BERETTA 1935 pistol, world renowned for over a quarter of a century.

The BERETTA " 70 " SERIES takes advantage of the newest steel alloys and the most advanced engineering techniques.

The functioning is based on case projection of blow back action.

The BERETTA " 70 " Series is manufactured both in the calibers 7.65 (.32), ,380 Auto and .22 L. R.

1) INCREASED ACCURACY OF FIRE - The barrel guide, fitting the barrel into the receiver, has been lengthened almost equalling that of the Beretta 01ympic target pistol. This definitely increases the accuracy of fire at both short and long ranges.

3) CRISP TRIGGER PULL - An improved sear release mechanism, utilizing new steel alloys, ensures a crisper and smoother trigger pull for more precise shooting.

4) SPEEDY MAGAZINE RELEASE - New Beretta push button magazine release facilitates high speed insertion and extraction of the magazine.

SUPERIOR POINTABILITY - The slanted pistol grip provides easier aiming. Newly designed stocks are both easier and faster to grip. Cartridges now enter the chamber with reduced loading angi e.

EXCLUSIVE SIMPLIFIED TAKEDOWN (See photographs of field strip sequences).

Reassemble in reverse order

1. slide
2. firing pin
3. firing pin spring
4. extractor
5. extractor spring
6. extractor pin
7. rear sight
8. barrel
9. recoil spring
10. recoil spring guide
11. frame
12. ejector
13. ejector pins (2)
14. safety lever
15. safety lever spring with pin
16. hammer
17. hammer pin
18. hammer strut
19. hammer spring

Variants [ edit | edit source ]

Italian [ edit | edit source ]

Centurion [ edit | edit source ]

Model produced with a slightly-smaller frame to compensate comfort in some shooters.

Compact [ edit | edit source ]

Model produced with a sub-compact frame, slide, and barrel. Aimed at sales in the concealed carry market.

Target [ edit | edit source ]

Model designed for usage in shooting competitions, with features such as a slightly-longer barrel.

Combat [ edit | edit source ]

Model designed with a threaded-barrel and excess picatinny rail mounted to the side of the pistol.

Carry [ edit | edit source ]

Model produced as an even more compact variation of the Compact model. Features a single-stack magazine.

Watch the video: ОХОТА НА ПЕРЕЛЁТНОГО ВЯХИРЯ, большие стаи, закрылись отлично #охотанавяхиря2021 #beretta (January 2022).